SigOFIT Optical-fiber Isolated Probe
Unveil Real Signal You've Never Seen
Based on exclusive SigOFIT™ technology, the SigOFIT optical-fiber
isolated probe has extremely high CMRR and isolation voltage, help
to unveil the whole truth of the signal within bandwidth.
Bandwidth：DC-1GHz
Common Mode Voltage：85kVpk
CMRR：up to 180dB
DC Accuracy：1%
Interface: Universal BNC
SigOFIT Optical-fiber Isolated Probe
Unveil Real Signal You've Never Seen
Based on exclusive SigOFIT™ technology, the SigOFIT optical-fiber
isolated probe has extremely high CMRR and isolation voltage, help
to unveil the whole truth of the signal within bandwidth.
Bandwidth：DC-1GHz
Common Mode Voltage：85kVpk
CMRR：up to 180dB
DC Accuracy：1%
Interface: Universal BNC
Present True Signal
SigOFIT probe has highest common mode rejection ratio, or CMRR, up to 128dB at 100MHz, over 100dB at 1GHz. It's the ultimate referee of signal fidelity measured by other voltage probes.
Highest Accuracy
As the ultimate referee of signal fidelity, SigOFIT optical-fiber isolated probe delivers highest test accuracy. It has excellent amplitude-frequency characteristics, DC gain accuracy ≤1%, while noise ≤ 0.45mVrms. Zero drift<0.1% (works 5 mins later), gain drift also <1%.
Best Probe for Third-Gen Semiconductor
SiC & GaN device can switch high voltages in a few nanoseconds, the signal may have high-energy high-frequency harmonics.
Even at the highest bandwidth, the SigOFIT probe still have nearly 100dB CMRR, perfectly suppressed the oscillation caused by high-frequency common-mode noise, no redundant components. It's the best choice for 3rd-gen semiconductor test & measurement.
Safe to Test GaN
The test leads of SigOFIT probe are short and with coaxial cable transmission, the input capacitance is as low as 1pF minimum, very safe to test GaN.
Wide Measurement Range
Unlike traditional differential probes can only test high-voltage signals, SigOFIT probe can be used with different attenuator tips to test differential mode signals from ±0.01V to ±6250V, achieve full-range output and very high signal-to-noise ratio.
Efficient & Affordable
Fastest response, can be tested immediately after power-on; AutoZero completed in less than 1 second, ensures accurate signal output in real time.
Applications
* Design of motor drive, power converter, electronic ballast
* Design of GaN, SiC, IGBT Half/Full bridge devices
* Design of inverter, UPS and switching power supply
* Safety test for high voltage, high bandwidth applications
* Power device evaluation
* Current shunt measurements
* EMI & ESD troubleshooting
* Floating measurements
Present True Signal
SigOFIT probe has highest common mode rejection ratio, or CMRR, up to 128dB at 100MHz, over 100dB at 1GHz. It's the ultimate referee of signal fidelity measured by other voltage probes.
Highest Accuracy
As the ultimate referee of signal fidelity, SigOFIT optical-fiber isolated probe delivers highest test accuracy. It has excellent amplitude-frequency characteristics, DC gain accuracy ≤1%, while noise ≤ 0.45mVrms. Zero drift<0.1% (works 5 mins later), gain drift also <1%.
Best Probe for Third-Gen Semiconductor
SiC & GaN device can switch high voltages in a few nanoseconds, the signal may have high-energy high-frequency harmonics.
Even at the highest bandwidth, the SigOFIT probe still have nearly 100dB CMRR, perfectly suppressed the oscillation caused by high-frequency common-mode noise, no redundant components. It's the best choice for 3rd-gen semiconductor test & measurement.
Safe to Test GaN
The test leads of SigOFIT probe are short and with coaxial cable transmission, the input capacitance is as low as 1pF minimum, very safe to test GaN.
Wide Measurement Range
Unlike traditional differential probes can only test high-voltage signals, SigOFIT probe can be used with different attenuator tips to test differential mode signals from ±0.01V to ±6250V, achieve full-range output and very high signal-to-noise ratio.
Efficient & Affordable
Fastest response, can be tested immediately after power-on; AutoZero completed in less than 1 second, ensures accurate signal output in real time.
Applications
* Design of motor drive, power converter, electronic ballast
* Design of GaN, SiC, IGBT Half/Full bridge devices
* Design of inverter, UPS and switching power supply
* Safety test for high voltage, high bandwidth applications
* Power device evaluation
* Current shunt measurements
* EMI & ESD troubleshooting
* Floating measurements
Key Specifications
* Note: Current model names updated on March 20, 2024, previous model names referred as MOIP01P, and OIP100 (e.g. 100MHz bandwidth).
Key Specifications
* Note: Current model names updated on March 20, 2024, previous model names referred as MOIP01P, and OIP100 (e.g. 100MHz bandwidth).
